geo plus

 VisionLidar   Screenshot 2019-04-23 at 15.04.47.png

A complete point cloud software

 

pointcloud.png
 
 What's new                                                    Subscription                                                Documentation                                                   This email address is being protected from spambots. You need JavaScript enabled to view it.


Screenshot 2019-04-23 at 15.13.47.png
Save Time
Classify your objects 3x faster and
focus on the most important aspects
of your projects, in just a few steps.
Screenshot 2019-04-23 at 15.13.55.png Save Money
Maximize your budget with a complete
software. ViisionLidar easily replaces
more than 4 traditional solutions. 
Screenshot 2019-04-23 at 15.14.02.png
Enhance your ROI
Get the most out of investment
after only 3 months of usage thanks to
the efficient workflow VisionLidar
provides. 
 
 
 
Process point clouds and 3D images of air, land and/or mobile swept points  
 

Why VisionLiDAR?

It's now possible to visualize, process, classify, segment, animate, and edit Point Clouds in one single software: VisionLidar. 

No more restrictions based on a maximum number of points; VisionLidar can read and process an infinite number of points to allow you to work with your massive Point Clouds in one single file.  Process Point Clouds from ALS, TLS, and MLS for all your civil engineering, land surveying, architecture, BIM, transportation, mines, quarry, and forestry projects thanks to VisionLidar.

Here are its functions in more details: 

 
 

General

 

Dynamic 3D Fence 

The dynamic 3D fence allows you to select parts of your point cloud thanks to an interior or exterior delimitation. The selection can be saved and used with different tools like editing, deleting, exporting, segmentation, classification, surface analysis, dendrometry, and cylinders and plans detection. It’s also possible to export parts of your point cloud into .E57, .LAS, .LAZ, and .PTS formats.

Screenshot_2019-06-07_at_09.37.35.png

Adaptive cross section template

Vectorize complex 3D infrastructures with a few clicks. Roads, tunnels, and other 3D structures can be captured and converted to your CAD with the adaptive 3D and cross section template tool. Multiple alignments can be managed at the same time using different 3D templates. Cross section can be copied to the next station or interval. The user can select single or multiple points or vertex to visualize and adjust the selection to a 3D road, bridge, or tunnel. This tool also helps you create lineworks with feature codes, as well as breaklines for surface exportation into .DXF or Shape File formats.

Screenshot_2019-06-07_at_09.38.03.png 

Image and Video creation

Create images, videos, and fly-throughs in your point cloud. With this tool, you can easily produce an image and save it in .PNG format. Create an intuitive time-based fly-through video in .AVI format in just a few clicks.

Screenshot_2019-06-07_at_09.38.11.png

Color shading for surface analysis

Colorize surfaces like buildings, DTM, or any plans to visualize the deviation of the Point Cloud in different colors.

Screenshot_2019-06-07_at_09.38.19.png

Model geometry

Extract contour lines, mesh, surfaces, planes, cylinders, trees, sidewalks, buildings, pavement lines, or any other model geometry to efficiently vectorize them. With or without a 3D fence constraint, it can easily be exported into .DXF or Shape file formats, or as a Vision Database.

Screenshot_2019-06-07_at_09.38.25.png 

Point Cloud comparison

Compare a part of two full LiDAR scans and identify their differences, then export a .PDF report. This function is adapted for building surveillance with its statistical shift tool.

Screenshot_2019-06-07_at_09.38.32.png

Online visualization

Export to Potree to visualize and publicize your Point Cloud online. This tool allows you and your clients to easily view, measure, and annotate any Point Cloud from a Web browser.

Screenshot_2019-06-07_at_09.38.46.png

Tree measurements 

Select a region or a part of the Point Cloud using the 3D fence tool and automatically select and measure a tree height, trunk diameter, crown surface and crown diameter, from chest height. You can also choose to apply a constraint on a bare earth surface or not.

Screenshot_2019-06-07_at_09.38.55.png 

Point Cloud Management 

Segment and filter your Point Cloud using the layer tool. VisionLiDAR can manage up to 128 layers to isolate parts of your scan areas for detailed editing. Rename the layers in compliance with the standards you are using such as DOT or CAD. Also visualize your Point Cloud in RGB, Normal, Scans, Intensity, Class, Wireframe, Color Shading, or Elevation. It helps you simplify your Point Cloud by eliminating irrelevant points without diminishing its accuracy.

Screenshot_2019-06-07_at_09.39.01.png 

Registration

Use a dynamic registration of Point Clouds tool to control your data and merge your scans using a least squares method.

 

Screenshot_2019-06-07_at_09.39.08.png

 

Civil Engineering and Land Surveying

 

Contour lines

Extract and draw contour lines from a surface and export them into .DXF format.

Screenshot_2019-06-07_at_10.27.56.png

Earthwork and Complex Volumes

Calculate volumes using four different methods for maximum precision: inverted prism, grid, cross section and solid for complex vertical and overhang surface.

Screenshot_2019-06-07_at_10.28.11.png

Road and tunnels

Vectorize complex 3D infrastructures with a few clicks, capture and convert your data to your CAD using the adaptive 3D template tool.. This tool creates cross section templates using feature codes. Multiple alignments can be managed at the same time with different 3D templates. Cross section can be copied to next station or interval. The user can select single or multiple points or vertex to visually adjust the selection to the 3D road, bridge, or tunnel. You can also use it to create lineworks with feature codes, as well as breaklines for surface exportation to .DXF or Shape file.

Screenshot_2019-06-07_at_10.28.27.png

Alignment

Create a 3D alignment from polylines, line intensity, or points with lines, as well as vertical and horizontal curves.

Screenshot_2019-06-07_at_10.29.07.png

Infrastructure Edge Line Extraction

Automatically find the edges of a sidewalk, pavement path, building footprint, powerlines, and export them into connectivity line for break lines exportation.

Screenshot_2019-06-07_at_10.29.26.png

Floor flatness

Verify the floor flatness analysis with a selection of your Point Cloud and colorize it into shading zones to represent differences in elevation. Then, export your results into a .PDF report.

Screenshot_2019-06-07_at_10.29.53.png 

Dynamic cross section and profile 

View and click any point by setting along an alignment or two points, vertically, horizontally, or at any slope angle and dynamically show the cross section in a separate window.

Screenshot_2019-06-07_at_10.30.02.png

Online publishing

Using Potree technology, allow your customer to easily view, measure, and annotate your Point Cloud from a simple Web browser.

Screenshot_2019-06-07_at_10.30.11.png

Slope analysis 

This intuitive tool allows you to select a surface and display a slope with colorized zones as well as slope intervals.

Screenshot_2019-06-07_at_10.30.21.png
 

Bare earth extraction

This tool allows you to extract a bare earth surface from your Point Cloud by automatically eliminating and removing vegetation, buildings, cars, humans, and other objects from the resulting mesh surface. It is particularly useful for projects where you need to visualize and analyze the characteristics of a surface. The results of your calculations are much more typical and precise.

Screenshot_2019-06-07_at_10.30.38.png 
 

 

Would you like to have more information?

REQUEST YOUR DEMO

 

 

 

  Acquire VisionLIDAR

Improve your productivity with VisionLIDAR

 

Standard Premium Ultimate
Screenshot_2019-05-28_at_08.56.25.png  Screenshot_2019-05-28_at_08.56.38.png   Screenshot_2019-05-28_at_08.56.46.png

 

 

 

 

 

What's new VisionLidar 2019

 

GENERAL
– Locate, measure, and position points, lines, and / or invisible point directly on two or more 3D images by photogrammetry.
– Publish your vector data (points, lines, polylines) on maps with ODBC compatible database (Sql Server, PostgreSQL, Oracle).
– Easy segmentation of your linear projects with new corridor management tools. Helping to simplify and reduce processing time during extraction.
– Automate the extraction of your broken lines.
– Annotate perpendicular slope along alignment.
– Create dynamic 3d images from point clouds.
– DTM extraction from centre line alignment and corridors.
– Measuring tools at a glance.
– New smart pick points.
– Colorize your point cloud directly from 3d spherical images.
– Export your vector data to GeoJson, Kml, Mapinfo, Dxf, Csv, LandXML formats.
– Intuitive lines plan intersection.
– Easy inventory with comments and PDF attachment file over point cloud and 3d image.
– Easy intuitive interface with tools tips.
– Easy Display point cloud intensity by colour.
– New export feature to VisionLidar 365.
– Measurements between scan and scan and/or modelled surfaces.
 

TERRESTRIAL LIDAR SCAN (TLS)

– Compatible with the latest format FLS Faro and Scene (new version).
– Scan to BIM in 50% less time with AI detection of walls, floors, windows, openings and doors.
– Export your BIM projects BIM IFC to Revit, ArchiCAD without loss.
– PDF reporting of tank deformation analysis.
– Extend invisible corner of existing contours.
– Building Vectorization from slices.
– Indoor mapping AI recognition (lights, windows, doors, desks, etc.)
– Pole and clash detection.
– Extract contours, cross-sections and profiles.

MOBILE LIDAR SCAN (MLS)

– SBET lines display with photos.
– GPS time management on point clouds.
– Add 3D imagery over your point cloud from (LEICA, Topcom, Teledyne, Faro, Z+F).
– Easy adjusting of 3D individual image parameters.
– Extract parallel feature lines from the corridor in less time.
– AI automatic road object extraction from point clouds and 3D imagery (cars, humans, poles, noises, buildings, traffic signs).
– Rail tracks geometry and catenary line detection.

 

AERIAL LIDAR ALS (ALS)

– Bare earth automatic extraction.
– Roof vector extraction.
– Corridor DTM surface management.
– Intelligent point cloud simplification and de-densification.
– Easy registration with control points from other sources such as MLS and TLS.

 

 

 

 

 

 

Video gallery 

 

 

Generate BIM from Point Cloud

 

 

 

 

Automatically detect all trees in a defined area

 

 

 

 

Share your processed point cloud on the web